Directories

Business - Education

[51-100 of 1254]
FNESS 6.2

FNESS 6.2

FIGENER developed a sophisticated software for head loss calculations in complex pipeline networks.

FNESS is a software for fluid flow calculations in steady state conditions, based on the Finite-Element Method.

FNESS ...

MINEQL+ 4.6

MINEQL+ 4.6

MINEQL is a powerful and easy-to-use chemical equilibrium modeling system that can be used to perform calculations on low temperature (0-50oC), low to moderate ionic strength (<0.5 M) aqueous systems.

MINEQL is a data driven ...

Megger ProActiv 1.4

Megger ProActiv 1.4

ProActiv is a powerful, easy to use battery database management software designed to analyze each individual battery in a battery system.

Battery testing is crucial to ensure a battery system provides standby and emergency power to ...

DioRad 4.0

DioRad 4.0

It is a free optical calculator tool for opticians, optometrists and ophthalmologists and lab technicians. Use it to do all your diopter to radius conversions. Calculate lens power at different vertex distances. Calculate manifest over refraction ...

Scale-Ruler 1.1

Scale-Ruler 1.1

Do you get drawings that were originally drawn to scale, but because the drawing has been reduced in a photocopier or fax, the drawings are at an odd scale?

Do you get drawings in a metric or imperial scale and you don't have ...

Seinemaster 3.2

Seinemaster 3.2

Seinemaster Capabilities
Depth
The distance from the surface to the sensor.
- Ensures you are around the fish before you purse.
- Avoid hookups on the bottom.
- Sink rate tells you how fast the seine is sinking.

ECMTUNE 4.1

ECMTUNE 4.1

It is an easy to use ECM reprogramming system for both professionals and novices alike. Quickly perform non-invasive flash reprogramming of the Engine Control Module through the vehicle OBD connector. It also includes full diagnostic functions as ...

Hydrant Flow Test 1.0

Hydrant Flow Test 1.0

Hydrant Flow Test

Visual Fitting 2.1

Visual Fitting 2.1

Visual Fitting is a math tool to implement linear, nonlinear curve fitting and surface fitting.

Main features:

- Implement curve fitting and graphing of linear models and nonlinear models.
- Implement surface ...

EDR 8.1

EDR 8.1

The EDR provides unique and extensive guidance and information on overcurrent protection for motors and transformers, design of motor circuits, fault current calculations and AC/DC voltage drop.

The EDR is the best way to calculate ...

LiveMath Viewer 3.5

LiveMath Viewer 3.5

LiveMath Viewer can open all LiveMath notebooks, and allows you to interact, explore, and change LiveMath expressions and graphs. LiveMath Viewer looks exactly the same as LiveMath Maker, but has the reduced functionality of LiveMath Plug-In.

AggFlow 121.6

AggFlow, the world's most sophisticated plant simulation and flow analysis software, has been developed specifically for the aggregate and mining industry to maximize production and improve profitability. Use AggFlow to build a crushing ...

RFScada 4.6

RFScada 4.6

Data Delivery Devices has developed control software based on Azeotechs DAQFactory product. This provides SCADA capability for RFScada plus other brands of hardware, and provides very comprehensive features that are common to many oilfield, rural ...

Digital Gravelometer 1.0

Digital Gravelometer is software for Windows® that enables you to measure unconsolidated gravel sediments rapidly and accurately from digital photographs.

With Digital Gravelometer you can dramatically increase the productivity ...

Bertec Acquire 4.1

Bertec Digital Acquire™ is designed to collect data from multiple force measuring devices and save it to either a text file or Matlab v4 compatible file. The text file can be formatted as either a comma-separated or tab-seperated file so ...

Dynacam10 10.2

Dynacam10 10.2

This program solves the kinematic and dynamic equations for cam-follower systems. Radial, linear, and barrel cams with either translating or oscillating followers can be designed. Roller and flat-faced translating followers can be accommodated on ...

Unisoft ProntoVIEW-MARKUP 1.0

Unisoft ProntoVIEW-MARKUP 1.0

Unisoft ProntoVIEW-MARKUP is used by electronic manufacturers and is designed for use across the entire production floor. ProntoVIEW-MARKUP can create process and assembly aid documents for assembly personnel. Instantly receive a report ...

Quincunx SPC Simulator DEMO 3.1

Practitioners of Statistical Process Control (SPC) need to have a very clear understanding of what SPC is and how it works. For years a mechanical Quincunx model that drops balls over number of pins and simulates real-life processes has been used ...

QCExpert 3.1

QCExpert 3.1

Interactive software for data analysis and statistical quality control for Windows
Interactive and Automated Analysis of Your Data by Advanced Statistical Methods.
Main Features:
- Basic Statistics
- Two Sample ...

CORD8win 3.1

Calculates the following screw threads: Metric ISO Thread according DIN 13. UST Tread according to ASME B1.1 and B1.2. Metric ISO-Trapezoidal Thread according to DIN 103. Pipe Thread according to DIN ISO 228. Whitworth Thread according to B.S. ...

Protect PV.AIM 6.0

Protect PV.AIM 6.0

PV.AIM tool helps you to calculate the right number of PV (photovoltaic) modules together with solar inverters.

Note: To run the tool Java is required.

With PV.AIM you can input data like PV Module,PV Inverter,PV Array ...

PVT Pro 2011.1

PVT Pro is a professional application, user-friendly software for Windows to model the phase behavior and properties of reservoir fluids designed. The module of asphaltenes unique modeling of this software is a powerful tool for predicting the ...

The Heat Exchanger Network 1.0

The Heat Exchanger Network 1.0

THEN is a heat exchanger network synthesis program that was developed by Professor F.C. Knopf at Louisiana State University. It integrates the networks of heat exchangers, boilers, condensers and furnaces for best energy utilization. It uses ...

Helical 2.0

Helical 2.0

Helical is a graphics-intensive bandpass filter design and analysis program based on the helical resonator.

Main features:
- The program designs bandpass filters with a selection of the order from 2 to 12, odd or even.
...

GasVent 2.9

GasVent 2.9

The Elite Software GasVent program quickly calculates the correct vent sizes for Category 1 Gas Powered Appliances. GasVent is a true Windows program designed to be simple and easy to use by both contractors and designers. The program is very ...

FX PhysEquate 3.1

FX PhysEquate 3.1

FX PhysEquate is NOT just another equation editor - it is something different and MUCH faster.

FX PhysEquate takes the original FX PhysEquate paradigm and removes its restrictions. A secondary science teacher can now use FX ...

EVAP-COND 3.0

EVAP-COND is a software package that contains NIST's simulation models for a finned-tube evaporator and condenser. EVAP-COND's help menu provides information about the program's capabilities and how to use it. The instructions ...

PeakLoad 1.0

PeakLoad 1.0

The calculation of heat load is a complicated problem. This is partly due to the delay of the various room peak load calculator instantaneous heat loads on the plant but also because of the variations in loads during the 24-hour period.

StatCalc 7.1

StatCalc 7.1

StatCalc is a user-friendly analytical tool which simplifies common statistical calculations with 22 procedures. You can use StatCalc to easily create and compare summary statistics, develop confidence intervals, and verify hand calculations. You ...

ABB Configurator 2.0

ABB Configurator 2.0

ABB Configurator is a free software developed by ABB Inc.

ABB Configurator let's you configure two types of devices :

A-Line Starter and PSS/PST Softstarter.

In the A-Line Starter you can configure the ...

SsdwLab5 5.0

SsdwLab5 5.0

SsdwLab5 facilitates the simultaneous use of up to 10 biochemical and/or ultrasound markers with known Gaussian distribution and correlation coefficients, as well as up to 15 markers with known trisomy 21 positive and negative likelihood ratio, ...

HeatHit 2.1

HeatHit 2.1

HeatHit -Arbitrary body shape editor and heat transfer analysis

Main Features:

- Easy creation of 3D bodies with holes, 3D views with different angles
- STL files import. You can import the body shape from STL ...

KWare Magma 2.4

KWare Magma 2.4

Magma is a simple utility that calculates silicate magma/lava classifications and properties from user-entered major-element compositions. The following screen shot shows results for a typical andesite pumice (tephra), which has 0.1 wt% H2O. CIPW ...

Ultimate Advantage for Windows 2.0

Ultimate Advantage for Windows 2.0

Ultimate Advantage™ combines all of the features of our other calculators into one powerful computing tool.
Entry and display of special formats:
Feet-inches-fraction (e.g., 24' 7-3/16")
Inches-fraction (e.g., ...

PC|SCHEMATIC Automation 13.0

PC|SCHEMATIC Automation 13.0

The electrical CAD software, PC|SCHEMATIC Automation, gives you the peace of mind and overall view you need each day. Focus on the electrical design, and let the CAD software handle the practical details.
You have pretty much completed ...

MAXQDA 11.1

MAXQDA 11.1

MAXQDA is a qualitative data analysis software – called a QDA-Software – and supports all individuals performing qualitative data or content analysis and helps to systematically evaluate and interpret textual data.

It is ...

Bernina CutWork 4.0

BERNINA CutWork Accessory and BERNINA CutWork
Software take embroidery to a new level.
Let your imagination fly!

There’s a new edge to creative sewing ... cutting!
The BERNINA CutWork Accessory together with ...

Fityk 0.9

Fityk 0.9

Fityk is user friendly, open source software for nonlinear curve fitting and data analysis. It is primarily used by scientists to analyze data from experiments (powder diffraction, chromatography, photoluminescence and infrared and Raman ...

SYBYL-X 1.3

SYBYL-X provides intuitive molecular modeling for life scientists interested in drug and molecular design. Small molecule and macromolecular modeling and simulation, cheminformatics, lead identification, lead optimization techniques and more are ...

SiTEM-Semdi 3.1

The SiTEM/Semdi program package is a powerful tool for processing and inversion of ground-based time-domain electromagnetic data (TEM). Over the last 10 years the software package has been used to process and invert more than 30 000 TEM-soundings ...

T24 Data Provider Viewer 1.0

T24 Data Provider Viewer 1.0

T24 Data Provider Viewer
This product allows you to view and log data from the T24 range of 2.4GHz telemetry products.Select the radio channel required and choose a device to view from the list of detected devices. Once viewed the data can ...

PAN-MARK 1.0

PAN-MARK 1.0

Modern industries are using a wider variety of label products than ever before. PAN-MARK is designed to work in
tandem with the various label types and materials found in today’s marketplace.
Panduit offers computer printable ...

Extron Electronics - Signal Processing Products Control Program 1.2

Extron Electronics - Signal Processing Products Control Program 1.2

Signal Processing Products Control Program is a control application software for DVS 304, DVS 304 DVI, IN1508, RGB-DVI/HDMI 300, RGB-HDMI 300 A, Annotator and USP 507.

Main Features :

- Scaler Output Card support for ...

BayesLatentClassModels 1.3

BayesLatentClassModels is a user-friendly interface for analyzing diagnostic test results using latent class models. Results from one to eight tests can be modeled. Conditional dependence between pairs of tests can be modeled addition of a latent ...

DipoleSimulator 3.3

DipoleSimulator 3.3

DipoleSimulator is a free program written by Patrick Berg for the simulation of EEG or MEG activity generated by model sources. The purpose of this tool is to provide a better understanding of dipole modeling and the link of brain sources with ...

DWSIM 2.0

DWSIM 2.0

DWSIM is an open source, CAPE-OPEN compliant chemical process simulator written in VB.NET, with advanced thermodynamic calculations, reactions support, petroleum characterization tools and a fully-featured graphical interface.

...

SAI FuelCell 3.9

SAI FuelCell 3.9

FuelCell is designed to control or monitor all of the parameters of an operating fuel cell and perform a wide variety of experiments. It is technology independent and may also be used with DMFC, PAFC, MCFC, or SOFC type fuel cells.

...

Lynxmotion RIOS SSC-32 1.0

Lynxmotion RIOS SSC-32 1.0

RIOS (Robotic arm Interactive Operating System) is a Windows 95/98SE/2000/XP/Vista program for controlling the AL5 series of robotic arms with the SSC-32. With RIOS, your robot can be taught sequences of motion via the mouse or joystick. This ...

PCBMill 1.0

PCBMill is a free of charge PCB prototyping software.
It can generate isolation milling path from industrial standard Gerber files.
Mill and drill your prototype PCB on your CNC machine in minutes.

How to use the software ...

AISIWIN 8.0

AISIWIN 8.0

Fast, efficient sizing for uniform bending loads, axial loads and single or multiple equal span members.
"Works like an interactive version of a stud manufacturer's catalog with complete flexibility of inputs."

...

[51-100 of 1254]