Directories

Business - Education

[251-300 of 1254]
ArrayStar 4.1

ArrayStar 4.1

ArrayStar has established its reputation as an easy-to-use gene expression analysis software package that is brimming with visualization tools to help you analyze your microarray data, including Venn diagrams, a scatter plot, heat maps and line ...

AEC CutFill 1.0

Earthwork Volume/Quantity Calculating Software
For grading and excavation contractors and clients who need cut and fill volume quantity information, is an earthwork program that provides a solution for traditional cross section project ...

ASTOS 7.0

ASTOS 7.0

ASTOS contains - as an extension to GESOP - an extensive user library of aerospace vehicle differential equations for 3-DOF and 6-DOF, aerospace vehicle boundary and path constraints and cost functions. Using the ASTOS library a multitude of ...

DMM-ProfiLab 4.0

DMM-ProfiLab 4.0

The DMM-ProfiLab-Software allows you to develop any measuring technology projects based upon digital multimeters: A simple curve plotter or a complex measuring technology project. By the integrated support of relay cards you are not only able to ...

MathCenterLevel2 1.0

MathCenterLevel2 1.0

Scientific Calculator resembles Advanced Calculator from Math Center Level 1 but requires higher level of mathematical education. All simple functions like square and square root are absent. Instead, there are added Factorial, Sigma for sum ...

Structural Codes Assistant 1.3

Structural Codes Assistant is a simple software for better understanding of equivalent seismic loadings.

Main Features:

- Automated calculation of seismic loadings.
- Calculation of lateral forces, story moments, ...

RemLife 3.2

RemLife 3.2

RemLife is a high temperature remaining life cost assessment program and is a simulator for coal and gas fired power stations and petrochemical plants that calculates the damage from unit cycling, then assesses the costs of the chosen cycling ...

Infiltec BDwin 2.1

Infiltec BDwin 2.1

BDwin analyses Infiltec blower door data and estimates building air infiltration, flow rate, and leakage area. Data from the DM4 micromanometer can be automatically entered into the program. BDwin works with all Infiltec air leakage measurement ...

Hourly Analysis Program 4.5

Hourly Analysis Program 4.5

A system design tool and an energy simulation tool in one package. Uses a Windows-based graphical user interface and 32-bit software. HAP's design module uses a system-based approach that tailors sizing procedures and reports to the specific ...

Aniseikonia Inspector 3.3

Aniseikonia Inspector 3.3

The Aniseikonia Inspector™, is a Windows software program for the clinical management of aniseikonia.

Main features:

- an advanced aniseikonia test
- a design tool to calculate correcting prescriptions
...

ComSitePro 6.2

ComSitePro 6.2

ComSitePro is the only tool on the market specifically designed to help identify, analyze, locate and resolve radio frequency interference (RFI).
ComSitePro is a powerful, wireless communications site interference analysis tool. It is ...

ASDIP Retain 2.0

ASDIP Retain 2.0

ASDIP Retain is a suite of modules specifically dedicated to the design of retaining walls, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.
...

XSLOPE (Student Version) 4.7

XSLOPE(Student Version) computes the stability of an earth slope using Bishop's (1955) simplified method for circular failure surfaces or Morgenstern and Price's (1965, 1967) analysis for non-circular failure surfaces.The algorithm used ...

BASEMENT 2.2

The aim of the software system BASEMENT, in terms of its free availability and its accompanying scholar programs, is to enable a broader range of people to skilfully process river modelling projects in a justifiable amount of time.

...

Mimics 13.1

Mimics 13.1

Mimics software allows you to process and edit your 2D image data (CT, μCT, MRI, etc.) to construct 3D models with the utmost accuracy, flexibility and user-friendliness. The powerful segmentation tools allow you to segment your medical CT/MRI ...

Mplus 6.1

Mplus 6.1

Mplus is a statistical modeling program that provides researchers with a flexible tool to analyze their data. Mplus offers researchers a wide choice of models, estimators, and algorithms in a program that has an easy-to-use interface and ...

Afors-Het 2.4

Afors-Het 2.4

AFORS-HET is a numerical simulation of Solar Cells and Measurements.
Features:
-Modelling of an arbitrary 1D sequence of semiconducting layers and interfaces
-Equilibrium EQ, steady-state DC, small sinusoidal pertubation AC and ...

TecQuipment Structures 1.3

TecQuipment Structures 1.3

This software is a single seat virtual experimentation pack to allow computer based simulations of all of the experiments in TecQuipment's Structures Range. For use with a stand-alone PC (PC not included).

A user friendly easy ...

Hemisphere GPS MapStar 6.6

Hemisphere GPS MapStar 6.6

MapStar PC software enhances Satloc guidance systems through its mapping and file conversion capabilities. It also reads and displays Satloc log files so you can analyze and convert application data to GIS-based file formats.MapStar allows you to ...

TakeoffLive 4.0

TakeoffLive 4.0

Takeoff Live is the most elegantly simple, affordable digital takeoff software on the market today. No digitizer or plan prints needed...you can even use a picture of your plans from your digital camera.

Even if you've never ...

SigmaConsole 2.4

SigmaConsole 2.4

The mathematical console SigmaConsole supports the most common and useful functions. It’s easy to use: to evaluate an expression, simply write it, using operators ( - * / ^), parenthesis and mathematical functions and press ENTER. You can ...

Simulator 2.5

Simulator 2.5

§imulator is a general-purpose, graphic process simulator which can be used for process & workflow modeling, simulation & active flowcharting. It uses flowcharting symbols to depict process flows & allows you to run & ...

Torganal2 1.0

Torganal2 1.0

Torganal2 is a Windows program that is designed for university and college students beginning their study of organic spectroscopy. Its main aim is to enable users to practice (and thereby improve) their skills at spectral interpretation. Its ...

INSITU32 3.0

INSITU32 3.0

The INSITU program interprets statical and dynamical geotechnical in situ tests. In order to interpret the SPT tests, the program utilises the main correlations that are normally used to determine the geotechnical parameters of a soil.

RobustFit 1.0

RobustFit 1.0

RobustFit is a free utility programme for robust locally-weighted scatterplot smoothing (Lowess), or robustly fitting data to a polynomial function.

Lowess Smoothing

A standard way of smoothing data to reduce noise is ...

WXRCV 0.4

WXRCV 0.4

It is a little utility to automate the reception of the APT signal transmitted by the low orbit Weather satellites. It will:
Set the receiver to the correct frequency just before the satellite pass (using a serial connection).
Record ...

ICDD PDF-2 Release 2003 2011.0

ICDD PDF-2 Release 2003 2011.0

ICDD PDF-2 is designed for inorganic materials analyses using automated diffractometers.Many common organic materials from the ICDD are added to this database to facilitate rapid material identification.This application contains data from the ...

Quick Spline 2.5

Quick Spline 2.5

Quick Spline is a powerful yet easy to use involute spline program for calculating involute spline dimensions for 7 different spline standards allin one program.

Quick Spline gives you all major spline data such as actual and ...

EaziCAM 1.0

EaziCAM 1.0

EaziCAM is a 2D and 3D CAD/CAM system.

Using EaziCAM you can programme drilling, profiling, pocketing and contouring operations from CAD data or models. EaziCAM is based on the EaziForm CAD/CAM software used by the automotive ...

Eco-Bat 3.0

Eco-Bat 3.0

Eco-Bat offers the possibility to quickly perform the life cycle impacts analysis of a building. This tool is specially designed to be used during the conception phase. It can be used by architects and engineers who want to assess the ...

VNAR3 3.0

VNAR3 3.0

The vnar performs measurements on one port or two port networks. The vnar is capable to make 4 measurements. The detectors in vnar are somewhat temperature sensitive. The vnar does not measure absolute signal magnitude or phase delay. It takes ...

EUTP 0.8

EUTP is the best utility package available for PLC & HMI Engineers!! E.U.T.P provides a set of utilities designed to help engineers with various tasks like base conversion and calculation. unit conversion, time conversion, SI units view, ...

nikobus 3.7

nikobus 3.7

Nikobus, the home automation system from Niko for the control of heating, lighting, audio, etc., is already on a version 3.2.3. The Nikobus software is structured in a user-friendly and intuitive manner.The software is conveniently arranged and ...

Heavent 8.0

Heavent 8.0

When it comes to designing industrial ventilation systems to control airborne contaminants, Heavent does the job right. Maintaining minimum velocities, balancing static pressures, selecting fans, defining air cleaners of all types, you name it ...

Ocean Wave Atlas 2.0

Ocean Wave Atlas 2.0

Climate charts with wave height, direction and period. Climate is by definition the synthesis of weather conditions in a given area, characterized by long-term statistics (mean values, standard deviations, etc.) of the meteorological elements in ...

TableCurve 3D 4.0

TableCurve 3D 4.0

If you are a scientist or an engineer, TableCurve 3D linear and non-linear surface fitting suite of applications will automate, in a single step, the surface fitting process for you and enable you to find the ideal model for your 3D data within ...

Distillation simulator 1.7

Distillation simulator 1.7

Simulation of distillation of binary mixtures. Concentrations vs distillation progress.
Main Features:
- 6 stages of distillation simulation
- Graphics printing
- Change the relative volatility on the VLE diagram
- ...

Weather Defender 1.1

Weather Defender 1.1

Weather Defender connects your desktop to a national network of radar and weather satellites, and continuously scans for weather intruders near your home or place of business.
Main features:
- Live Weather Radar
- Always-on ...

Brightwell BrightLogic 1.0

Brightwell BrightLogic 1.0

BrightLogic is such a flexible system that it's ideal for small on-premises laundries and large industrial operations alike.

Main features:

- Programme formula select with wash cycle names
- Bespoke access ...

ADMAX M/E Performance Analysis 4.0

This System provides head office/on-board managers with the information to evaluate the performance of main diesel engine in operation.
Not only SHOP TRIAL data but also SEA TRIAL data can be referred to judge the current condition of the ...

OMICRON CT Analyzer PC Toolset 4.1

The updated CT Analyzer software includes an automated test procedure to test each CT ratio of a multi ratio CT with its specifically defined burden value. The CT Analyzer's test configuration proposes individual burden values according the ...

iFD Geometry 2.0

iFD Geometry for Windows is the best-selling Pocket PC math utility for students and engineers iFD Geometry as well as its Windows based equivalent iFD Geometry WIN. iFD Geometry allows You to calculate the elements, perimeters and areas of ...

Chromosome Analysis Suite 1.1

Chromosome Analysis Suite 1.1

Affymetrix® Chromosome Analysis Suite (ChAS) software, designed specifically for cytogenetic researchers, gives you the exact functions you need within an easy-to-use graphical interface. You'll be able to Generate results quickly with a ...

PerRoad35 1.0

PerRoad35 1.0

PerRoad is a mechanistic-based procedure for the design of flexible long-life or perpetual pavement structures. The procedure was developed at the National Center for Asphalt Technology (NCAT) at Auburn University (AU) in conjunction with the ...

Lab1W 1.1

Lab1W 1.1

Lab1W is a modul of the Merseburg Database MDB also separately to use.

Main Features :

1. Calculation of Concentrations for mixtures up to 6 components:

- Converting mole fractions → mass fractions

V++ Demo 5.0

V is a precision digital imaging and spectroscopy system, an exceptionally powerful product which remains remarkably easy to use.V incorporates many hundreds of image processing functions, including brightness, contrast and gamma corrections, ...

StatPlus 2007 4.9

StatPlus 2007 4.9

With StatPlus 2007, one gets a robust suite of statistics tools and graphical analysis methods that are easily accessed though a simple and straightforward interface. The range of possible applications of StatPlus 2007 is virtually unlimited - ...

Bio-Loom 1.5

Bio-Loom program weaves several different threads of data into a cohesive whole. Bio-Loom still calculates hydrophobic and molecular refractivity parameters via CLOGP & CMR, calculations which have been the world standard for decades, but it ...

Functions 1.0

Functions 1.0

Easy to use, intuitive program to visualize and study functions of one variable in a defined interval to find roots, maxima and minima, integral, derivatives, graph. You can predefine constants and specify the error bound for the results. It can ...

MPSuperShape 2.8

Quickly combine and intersect shapes in Microsoft MapPoint!

Import, export, and copy shapes between maps!

If you are already using Microsoft® MapPoint®, you know how useful shapes can be. Unfortunately the only ...

[251-300 of 1254]