Download Active Webcam
Active WebCam captures images up to 20 frames per second from any Video Camera or USB Camera and broadcasts them either from your computer or through any FTP server. Viewers can watch real video, not still images like other software does. All you need to broadcast is a Windows compatible camera or capture device with a framegrabbing driver. There is no need for a special webcam, for example, you can use a standard tv-card together with a camcoder
Features:
- Works with all USB and Parallel Port cameras, Windows compatible Capture Devices and Framegrabbers, TV-boards, and with Network IP Cameras.
- Broadcasts live video up to 30 frames per second.
- Multiple cameras support. Simultaneous recording and broadcasting from unlimited number of cameras.
- Dynamic IP Service, that gives a permanent internet address to your web camera whenever IP of your computer changes.
- Time stamps captured video.
- Broadcasts audio.
- Supports Encrypted Transmission.
- Records password protected video clips.
- Performs Live Recording that allows rewind and playback captured content at any time.
- Has features to change camera's Pan, Tilt, and Zoom.
- Helps you to create web page for your web camera.
- Records video when a motion is detected.
- Allows to view recorded video remotely.
- Sends you a email if a motion is detected.
- Runs a program when a motion is detected.
- Allows to define the active area for motion detection.
- Creates thumbnails from captured images.
- Has a comprehensive scheduler.
- Checks the available space on hard drive and stops recording if there is no available space.
- User name and password to control access to your camera and recorded videos from Internet.
System Requirements:
- Intel® Pentium® II/200 MHz or compatible
- Microsoft® Windows® 95, 98, ME, NT, 2000, or XP
- 32MB RAM (64 MB recommended)
- 20 MB hard disk space
- Color monitor
- Mouse or other pointing device
Visit Homepage for Moreinfo about Active Webcam
Download Location:
Active Webcam (FreeWare)